GT Sonic-applicationdetails (2025)

Before-After-Cleaning

FAQ:

1.Which cleaning solution should I use?

A number of detergents, wetting agents and other such components are used in the making of a modern ultrasonic cleaning solution. And there is a variety of formulations available from which you can take your pick depending on the application. Selecting a proper solution is very important for a satisfactory cleaning job and to stop unwanted reactivity with the part being cleaned.

2.Which cleaning solution shouldn’t I use?

Flammables or solutions that have very low flash points should never be used. Cavitation releases energy which is then turned into heat and kinetic energy. As a result of that, high temperature gradients in the solutions are produced. This can be very hazardous for the part being cleaned. Acids, bleach and bleach by-products should generally be avoided. but may be used with indirect cleaning in a proper indirect cleaning container, such as a glass beaker, and appropriate care.Strong acid or alkaline cleaning solution will damage stainless steel tanks,to overcome this problem,pls use mild PH solution.

3.When should the ultrasonic solutions be changed?

Solution should be changed when the solution is very dirty or depleted or when you notice a decrease in cleaning action.However, you must remember that every cleaning session does not require a new batch of solution.

4.What is direct and indirect cleaning?

Direct cleaning occours when the parts are cleaned in the cleaning solution which fills the cleaner.Usual the parts inside the mesh cleaning basket.

The indirect ultrasonic cleaning is used when the parts to be cleaned are placed in a remove tank or beakers that contains cleaning chemical that could damage the ultrasonic cleaner.

5.How to Maintain Your Ultrasonic Cleaners?

1. In order to function, the ultrasound cleaner needs an adequate solution and by now, you should know to Strong acid or alkaline cleaning solution will cause corrosion, rust and even puncture of tank or machine body. To overcome this problem, dilute to mild PH solution or request for a tank made of a specific grade of stainless steel like SUS304.

2. Always unplug the unit before draining the solution. Leaving the heating elements energized by accident can cause them to overheat and fail. Also, water and electricity don’t mix, and the combination can be lethal when the human body is involved with excess splashing.

3. DO NOT operate the unit without fluid in the tank. When filling the tank, always ensure that the “MAX” marking is not exceeded.

4. Do not run the device for an extended time or continuously.

5. Do not hit the device. Be careful when moving the device.

6. Use a piece of cloth to cleaning and dry the tank after use it.

Before-After-Cleaning

FAQ:

1.Which cleaning solution should I use?

A number of detergents, wetting agents and other such components are used in the making of a modern ultrasonic cleaning solution. And there is a variety of formulations available from which you can take your pick depending on the application. Selecting a proper solution is very important for a satisfactory cleaning job and to stop unwanted reactivity with the part being cleaned.

2.Which cleaning solution shouldn’t I use?

Flammables or solutions that have very low flash points should never be used. Cavitation releases energy which is then turned into heat and kinetic energy. As a result of that, high temperature gradients in the solutions are produced. This can be very hazardous for the part being cleaned. Acids, bleach and bleach by-products should generally be avoided. but may be used with indirect cleaning in a proper indirect cleaning container, such as a glass beaker, and appropriate care.Strong acid or alkaline cleaning solution will damage stainless steel tanks,to overcome this problem,pls use mild PH solution.

3.When should the ultrasonic solutions be changed?

Solution should be changed when the solution is very dirty or depleted or when you notice a decrease in cleaning action.However, you must remember that every cleaning session does not require a new batch of solution.

4.What is direct and indirect cleaning?

Direct cleaning occours when the parts are cleaned in the cleaning solution which fills the cleaner.Usual the parts inside the mesh cleaning basket.

The indirect ultrasonic cleaning is used when the parts to be cleaned are placed in a remove tank or beakers that contains cleaning chemical that could damage the ultrasonic cleaner.

5.How to Maintain Your Ultrasonic Cleaners?

1. In order to function, the ultrasound cleaner needs an adequate solution and by now, you should know to Strong acid or alkaline cleaning solution will cause corrosion, rust and even puncture of tank or machine body. To overcome this problem, dilute to mild PH solution or request for a tank made of a specific grade of stainless steel like SUS304.

2. Always unplug the unit before draining the solution. Leaving the heating elements energized by accident can cause them to overheat and fail. Also, water and electricity don’t mix, and the combination can be lethal when the human body is involved with excess splashing.

3. DO NOT operate the unit without fluid in the tank. When filling the tank, always ensure that the “MAX” marking is not exceeded.

4. Do not run the device for an extended time or continuously.

5. Do not hit the device. Be careful when moving the device.

6. Use a piece of cloth to cleaning and dry the tank after use it.